Aller au menu Aller au contenu
Thèmes de recherche
Microélectronique, électromagnétisme, photonique, hyperfréquences
Thèmes de recherche
Thèmes de recherche

> Recherche > PHOTO > Axe Capteurs

Capteurs photoniques intégrés

Responsable : Elise GHIBAUDO

Contexte et objectifs

L’IMEP-LAHC est doté d'une plateforme d’optique intégrée sur verre historiquement liée au développement de composants pour les télécommunications dans le proche infrarouge.
Nous développons sur cette plateforme des fonctions actives (amplification optique, lasers DFB,..) et passives (duplexeurs, phasars, interféromètres,..) à destination du domaine des télécommunications optiques et des capteurs. Par ailleurs, nous disposons d'une expertise en micro-fluidique sur verre, ce qui permet la réalisation de composants opto-fluidiques complètement intégrés. Finalement, un ensemble d'outils de simulation développés au laboratoire permet de modéliser nos procédés de fabrication et de simuler le comportement électromagnétique des dispositifs réalisés grâce aux méthodes AFMM (2D et 3D), RCWA (2D et 3D) et Méthode Différentielle avec FFF (2D).

Voici quelques exemples de recherches menées au sein de cet axe :

  •  Extension de la bande spectrale de transparence de nos guides d'ondes vers le visible pour ouvrir notre technologie aux applications de type capteurs biologiques pour la santé, l’agro-alimentaire ou l’environnement.
  •  Développement de capteurs LIDAR et de spectromètres intégrés.
  • Hybridation de matériaux non-linéaires et magnéto-optiques sur verre dans le but de fonctionnaliser nos guides d'ondes.
  • Hybridation de circuits optiques à base de matériaux semi-conducteurs (silicium et III-V) sur verre pour une intégration monolithique des sources et des détecteurs sur nos capteurs. Cette approche permet également le développement d'interposeurs en verre permettant la distribution de signaux optiques et électriques entre différentes puces opto-électroniques sur matériaux semiconducteurs.

Exemples

Detection of plutonium (VI) in an optofluidic device

Detection of plutonium (VI) in an optofluidic device
The IMEP-LAHC worked with the Marcoule CEA to create a novel optofluidic sensor, dedicated to probing fluids that are both chemically agressive and radioactive such as those involved in the reprocessing of spent nuclear fuel.
The device, entirely made on glass, is rugged enough to be exploited in a nuclearized glove box to perform absorption spectroscopy, thanks to optical waveguides made by ion-exchange on glass interacting with a fluidic micro-cuvette.
This allowed the first concentration measurement of plutonium (VI) in nitric acid in a microsystem containing only 20 µl of radioactive liquid. When compared to the 10 ml samples needed for standard measurements, this device paves the way to faster and cheaper analysis of spent nuclear fuel.

Contact: Davide BUCCI
Relevant publications : Microsensing of plutonium with a glass optofluidic device.
Optical Engineering, 2019 =>  https://hal.archives-ouvertes.fr/hal-02157782



 

Optical numerical tool development for scattering analysis of diffractive components and color generation

The light scattering from periodic structure is an important subject for different types of applications (Spectrometry, wavelength filter, photovoltaic structures …). For that, numerical modelization tools as RCWA (Rigorous Coupled Wave Analysis) or the DM (differential Method) are developed in our lab. RCWA is efficient for lamellar profiles but this is not the case for continuous profiles especially for TM polarization with grating composed of metal. The DM associated to the FFF has been demonstrated to be a solution.  The development of these tools is used in this project to design novel color diffractive components for security application.
Tangential boundary condition and |Ex|2 evolution for two numerical tools (DM-FFF, RCWA)
(Period of 0.5 µm, depth of 0.2 µm, nsup = 1,  nmetal = 1.3 + j7.6, incident angle 30° and  λ= 0.6328 µm).
  • Study performed by:
    Habib Mohamad (PhD), Alain Morand and Pierre Benech
  • Collaborations:
    • D. Macias and S. Blaize, INL, Troyes, France
    •  Mikael Renault, SURYS, Bussy-Saint-Georges, France
  • Contact:
  • Support:
    This research is supported by the French Research Agency (ANR) through the ANR PRCE project ODISSEA (ANR-16-CE39-0016)
  • References:
    - H. Mohamad, S. Es-Saïdi, A. Morand, P. Benech, D. Macias adn S. Blaize, « Fast Fourier Factorization : a powerful tool for the modelling of non-lamellar metallic gratings compared to the C-method », OWTNM in Malaga, 2019
    - A. K. Gonzales-Alcade, R. Salas-Montiel, H. Mohamad, A. Morand, S. Blaize and D. Macias, "Optimization of all-dielectric structures for color generation", Applied optics 57 (14), pp. 3959-3967, 2018.
    - H. Mohamad, A. Morand, S. Blaise, D. Macias, P. Benech, « Efficacité de la FFF sur la RCWA et la méthode différentielle appliquée à la diffraction d’un réseau métallique sinusoïdal », Journées Nationales d’Optique Guidée à Toulouse, 2018.- H. Mohamad, A. Morand, P. Benech, S. Blaise « La méthode différentielle associée à la FFF : de l’optique diffractive vers l’optique guidée », GDR Ondes à Marseille, juin 2019.

Nano-grooves scattering centers acting as antenna in integrated optics Fourier transform spectrometers

Stationary Wave Integrated Fourier Transform Spectrometers (SWIFTS) are based on the sampling of a stationary wave using nano-scattering centers on the surface of a channel waveguide. Single nano-scale scattering centers above the waveguide surface will radiate the sampled signal with wide angular distribution, which is not compatible with the buried detection area of infrared detectors, resulting in crosstalk between pixels. An implementation of multiple diffraction nano-grooves (antenna) for each sampling center is proposed as an alternative solution to improve directivity towards the detector pixel by narrowing the scattering angle of the extracted light. And its efficiency is demonstrated from both modelized and measured far field radiative patterns exhibiting a promising method to be used for future integrated IR-SWIFTS.
  • Study performed by:
    Irène Heras (Post-doc) and Alain Morand
  • Collaborations:
    •  G. Martin, IPAG, Grenoble, France
    • N. Courjal, FEMTO-ST, Besançon, France
  • Contact:
  • Support:
    This research is supported by the French Research Agency (ANR-11-LABX-0013) and FP7 people Marie-Curie Actions (PCOFUND-GA-2013-609102)
Schematic 2D representation of the LN waveguide with a 5 FIB nano-grooves (100x500 nm section) antenna and the IR detector comprised of 128x128 pixel array with 20 µm pixel pitch
Schematic 2D representation of the LN waveguide with a 5 FIB nano-grooves (100x500 nm section) antenna and the IR detector comprised of 128x128 pixel array with 20 µm pixel pitch

Simulation showing the influence of the number of nano-grooves antenna at ? = 1500nm, ? = 675 nm. The inset represents the FWHM of the radiation pattern versus the number of nano-grooves
Simulation showing the influence of the number of nano-grooves antenna at λ = 1500nm, Λ = 675 nm. The inset represents the FWHM
of the radiation pattern versus the number of nano-grooves
  • References:
    - A. Morand, I. Heras, G. Ulliac, E. Le Coarer, P. Benech, N. Courjal, G. Martin, "Improving the vertical radiation pattern issued from multiple nano-groove scattering centers acting as an antenna for future integrated optics Fourier transform spectrometers in the near IR", Optics Letters. 44(3), 2019.
    - I. Heras, J. R. Vazquez de Aldana, A. Morand and G. Martin,. “High resolution and wideband integrated optics infrared stationary-wave spectrometer fabricated by ultrafast laser inscription”, Advances in optical and mechanical Technologies for telescopes and instrumentation III, Proceeding of SPIE Volume 10706, 2018.
    - M. Bonduelle, G. Martin, A. Morand, G. Zhang, G. Cheng, C. D’amico and R.Stoian, « Laser Written Nano-Antenna and Waveguides devoted to Stationary Wave Sampling in Integrated Optic Spectrometers for the Near Infrared », CLEO Europe 2019 in Munich, poster, 2019

 

Magneto-optical mode converter on glass

The integration of magneto-optical materials to realize non-reciprocal functions is still a challenging target. Indeed, classical magneto-optical materials require an annealing temperature as high as 700°C, involving strong thermal budget constraints. In this framework, this study shows how it is possible to realize an efficient magneto-optical mode converter integrating a magnetic nanoparticles silica/zirconia composite with an ion-exchanged glass waveguide. Using a sol gel process, a silica/zirconia matrix is doped by magnetic nanoparticles (CoFe2O4) and coated on a glass substrate containing straight channel waveguides made by a silver/sodium ion exchange. The extremities of the guides were previously buried using electric field-assisted burial in order to facilitate light injection. Soft annealing and UV treatment, both compatible with the ion exchange process, have been implemented to finalize the magneto-optical film.
  • Collaborations:
    • Laboratoire Hubert Curien, Université Jean-Monnet
    • Laboratoire PHENIX, Université Pierre et Marie Curie
  • Funding:
    Projet CIBLE région Rhône-Alpes
  • Relevant articles :
    hal-01998927v1
    ujm-01025451v1
    ujm-01386696v1
Magneto-optical mode converter on glass


 

mise à jour le 22 octobre 2019

anglais
IMEP-LAHC
Site de Grenoble
Grenoble INP - Minatec : 3, Parvis Louis Néel - CS 50257 - 38016 Grenoble Cedex 1

Site de Chambéry
Université Savoie Mont Blanc - F73376 Le Bourget du Lac Cedex
 
 
  CNRS  http://www.cnrs.fr      Site Grenoble-INP http://www.grenoble-inp.fr       Université Grenoble Alpes (UGA)      Université Savoie Mont Blanc
Univ. Grenoble Alpes